Thinner 90 (flotation solution)
Images are delivered by:
- Pickup
- Transport company
- Courier Service
- Personal visit of the manager
Flotation solution is used to extract a variety of minerals including copper, lithium, nickel, cobalt, gold, uranium and zinc. The thinner product line features products with low viscosity, high flash points and low evaporation rates to provide the right balance of good flow and phase separation with minimal thinner loss and reduced risk of fire. Thinners with low aromatic content and high flash point also contribute to the safety of working personnel and meet strict environmental requirements. The products have been tested at the largest copper mining companies in Russia and are recommended for use.
- Fractional composition, °С — beginning of boiling not lower than 155, end of boiling not higher than 205
- Flash point in closed crucible, not less than °С — 68
- Kinematic viscosity at 40 °С, mm2/s — not higher than 1.16
- Density at 20 °С, g/cm — 0.738
Handle the thinner in rubber gloves in a well-ventilated room. In case of skin contact with the thinner, wash it off with plenty of water. In the event of a thinner spill on the surface, it should be promptly collected with a scoop and the area washed with plenty of water. Do not allow the product to come into contact with heating appliances or electrical equipment. Keep away from fire.
