Polymer Based Primer Ultimax Gravity Primer
Images are delivered by:
- Pickup
- Transport company
- Courier Service
- Personal visit of the manager
Polymer Based Primer Ultimax Gravity Primer is a one-component, low-viscosity, yellow to brown, aromatic polyurethane-based liquid. It is supplied ready to use. It is used to improve adhesion of stone or rubber coatings with prepared substrate, eliminating capillary effect if the substrate is concrete. After drying it forms a homogeneous strong film with high adhesion to the substrate and subsequent layers.
- Mass fraction of NCO, % — 10 ±1
- Density, g/cc at 20 °C — 0.97–1.04
- Viscosity, MPa sec at 20 °C — 100–250
- Curing time — "tack-free dry" 4 hours, technical strength 18 hours
- Guaranteed shelf life — 24 months from the date of manufacture
- Packing — 10 l, 30 l, barrel 216 l, Euro cube 1000 l.
It is important to read and understand safety instructions before handling the product. It is imperative that one receives comprehensive training on how to use the product correctly. Wear gloves, overalls, eye and face protection when handling the product. Avoid inhalation of gas, vapor, aerosols. Use the product only outdoors or in a well ventilated room. In case of insufficient ventilation use respiratory protection. Wash hands and face thoroughly after work. Do not take contaminated overalls away from the place of work. For further information on the safe handling of chemical products, please refer to the Safety Data Sheet.
